Victron Bluetooth Smart IP22 12V and 15AH battery charger for caravans, motorhomes, campers and 4x4 overland.

The Blue Smart IP22 Charger is the new professional battery charger with integrated Bluetooth.

The Blue Smart IP22 Charger can be used in devices both in your workshop and in motor vehicles, such as (classic) cars, motorcycles, boats and motorhomes.

With its Bluetooth app you can log into VictronConnect and it allows you to get real-time status information and configure any Victron product that has built-in Bluetooth Smart.

High Efficiency With up to 94% efficiency, these chargers generate up to four times less heat compared to the industry standard.

And once the battery is fully charged, consumption is reduced to 0.5 watts, between five and ten times less than the industry norm.

6-Stage Variable Charge Algorithm: Test - Initial Charge - Absorption - Recondition - Float - Storage The Blue Smart charger features microprocessor controlled “adaptive” battery management.

Its "adaptive" function will automatically optimize the charging process based on the use that is given to the battery.

Fully programmable charging algorithm Absorption, float and storage voltages can be programmed with the Bluetooth app, as well as the reconditioning setting and temperature compensation value.

After enabling the expert mode, the application allows you to change almost all the parameters and time limits used by the charging algorithm.

Storage mode: reduced aging and maintenance when the battery is not in use Storage mode is activated when the battery has not been discharged in 24 hours.

In storage mode, the float voltage is reduced to 2.2V/cell (13.2V for 12V batteries) to reduce gassing and corrosion of the positive plates.

Once a week, the voltage is raised back to the absorption level to “even out” the battery. This feature prevents electrolyte stratification and sulfation, the main causes of premature battery failure.

Also charges Lithium Ion batteries Lithium Ion batteries are charged with a simple initial charge – absorption – float algorithm.

Fully discharged battery recovery function Will start charging even if the battery has been discharged to zero volts. It will reconnect to a fully discharged lithium ion battery with the internal disconnect feature.

Maximum measurements of the product with fixing pins, height 23.9 cm, width 11 cm and depth 6.5 cm, weight 1.3 kg.

230 V AC connection 1.5 meter cable with CEE 7/7 plug, BS 1363 (UK) plug or AS/NZS 3112 (AU/NZ) plug