Truma Combi 6 Diesel CP Plus iNet X System heating for motorhomes and campers.

Combi D 6 (Next generation)
Powerful diesel heating for large vehicles
Combi D 6 is a powerful diesel heater that heats and supplies water at the same time. It is particularly suitable for large vehicles and works with a fan, so that the heating of the motorhome also works while driving. In summer, the water can be heated independently of the heating function.

Saving battery and diesel consumption thanks to more efficient combustion
2 in 1: heat the room and water
More independent: heats at any altitude thanks to the integrated pressure sensor.

Individual, energy efficient and self-sufficient: the new generation of the Combi D 6
Combi D 6 is a powerful diesel heater that heats and supplies water at the same time. It is particularly suitable for large vehicles and works with a fan, so that the heating of the motorhome also works while driving. In summer, the water can be heated independently of the heating function.

Combi D 6 has an extremely compact design and is very light compared to other heaters of similar power. It is easily controlled via the CP plus digital control panel (iNet ready) or via the iNet X System.

The pressure sensor integrated directly into the electronics automatically regulates the combustion air supply. For greater flexibility, Combi D 6 is also available in version E with additionally integrated electric heating rods.

FrostControl Purge Valve Installed
Easy control with the CP plus digital control panel (iNet ready) or via iNet X System
Optimum distribution of hot air thanks to four air outlets
10L stainless steel water tank
Integrated compressed air sensor automatically regulates the combustion air supply
Long service life thanks to effective combustion control
Economical thanks to low battery power consumption and lower diesel consumption through particularly efficient combustion
Possibility of automatic air conditioning if a Truma air conditioning system is used.

Technical details

energy carrier
diesel according to EN 590
Nominal thermal power in diesel operation
1000W/2000W/3000W/4000W/5000W/6000W
Fuel consumption
0.1 – 0.6 l/h
Power consumption (at 12 V): Heating and water tank operation
0.4 – 8.1A
water content
10 liters
Heating time (from approx. 15 °C to approx. 60 °C): Water container
approx. 20 min
Heating time (approx. 15 °C to approx. 60 °C): Heater and water container according to EN 15033
approx. 80 min
Weight
15.8kg
Measurements (L x W x H)
510 x 450 x 300mm
Installation dimensions (minimum dimensions: additional space must be provided for the gas connection, water connections and drain valve (L x W x H) depending on the installation situation)
540 x 500 x 350mm
Power consumption (at 12 V): Water tank heating
0.5A
Air flow (free blow)
max. 287 m³/h
quiescent current
approx. 1mA
CP plus quiescent current consumption (optional)
3mA
FrostControl heating element (optional)
max. 0.4A
pumping pressure
max. 2.8 bar
System pressure
max. 4.5 bar