Forch White polymer strong hybrid mounting adhesive for caravans, motorhomes and campers.

Characteristics:
Single-component hybrid adhesive with high initial adhesive strength
Multipurpose
High ultimate tensile strength
Suitable for both absorbent and non-absorbent bottoms
Can also be applied without primer
Odorless, neutral
Does not contain isocyanates, plasticizers, solvents, or silicone
Application field:
Suitable for gluing very diverse materials such as e.g. e.g. natural stone, concrete, bricks, glass, mirrors, enamelled surfaces, porcelain, epoxy and polyester plates, hard PVC, polyurethane, stainless steel, anodized aluminum, copper, zinc, lead, painted wood and HPL plates
Not suitable for PE, PP, PC, PMMA, PTFE, soft plastics, neoprene and bituminous bottoms
It is not suitable for expansion joints, permanent contact with water as well as chlorinated environments.
Application:
Contact surfaces must be firm, clean, dry and free of grease and oil.
Apply the adhesive in vertical strips
It is recommended to perform adhesion and compatibility tests before definitively applying the adhesive.
Base material: 1K-SMP
White color
Final consistency: elastic
Viscosity (at +20° C): very viscous pasty
Shore A hardness: approx. 55
Density (according to EN 542 at +20° C): 1.57 g/cm³
Tensile strength: 2.20 MPa
Skin formation time
(at 23° C, 50% relative humidity): approx. 15 min
curing speed
(at 23° C, 50% rel. humidity): 2 – 3 mm / 24 h
Application temperature: +5°C to +40°C
Thermal resistance (hardened): -40°C to +90°C
Storage period: 18 months (in a dry place, between +5° and +25°C)