Degreasing and deoxidizing super cleaner with an acid character endowed with high moisturizing power, it penetrates pores and fissures, breaking up and detaching rust, carbon, and grease or dirt in general, exerting on them a true chemical reaction of decomposition, detaching it from the surface where they are attached. It does not contain organic solvents and is formulated based on a mixture of different surfactants balanced with penetrating agents and corrosion inhibitors . Grease, rust, carbon and general environmental pollution come off practically without rubbing with the application of sufficient water pressure in the subsequent rinsing phase.

PROPERTIES:

Decreases surface tension with electrostatic exchange effect. This facilitates the penetration of the cleaning solution into the most inaccessible pores and places, eliminating dirt and achieving its complete separation from the surface to be cleaned without scratching it or leaving any film and without damaging the paint or the surface.

Totally fireproof, it is not flammable. It is biodegradable.

It does not produce annoying acid fumes, although it should be used with the normal precautions for using products with an acid nature. (See the precautions for use)

Indicated for removing grease, oil, carbon, wax, resin, dirt, mold, rust stains and environmental pollution on boat hulls and decks, aluminum and stainless steel. Car tires.

It is applied with a spray or with any element through which it can be spread evenly on the surfaces to be cleaned. It is not necessary to rub, although it is important to allow the product to act sufficiently for at least 3 minutes. Its cleaning action is considerably enhanced with the duration of the action and using hot or cold water in the subsequent rinsing procedure.

Rinse with plenty of water at the end of the operation. Using a pressure machine is the way that best results are achieved since it is the pressure of the water itself that helps to easily remove dirt without the need for rubbing. Sometimes if the dirt is excessive or the pressure is not enough, a second application may be necessary.

It is recommended to carry out a previous test since there are many elements in very variable materials and surfaces that at high concentration and because it is an acid product could be harmed.